Os-engines 12TZ(P) Bedienungsanleitung

It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages

18Turn the engine with starter box to draw he fuel into the engine.FuelDeliver fuel into the carburetor.Fuel tank sideNow connect glowplug battery lea

20FINAL ADJUSTMENTThrottleStop ScrewNeedle ValveMeteringNeedleOpenCloseCloseOpenNeedle ValveMetering NeedleMore fuelLess fuel More fuelLess fuelRun th

22If the engine runs too fast with the throttle closed, the throttle stop screw should be turned counter-clockwise to allow the throttle opening to be

24CARE AND MAINTENANCE1.2.3.The minute particles of foreign matter, that are present in any fuel may, by accumulating and partially obstructing fuel f

26TROUBLE SHOOTINGSymptomCauseCorrective actionEngine fails to fire.Fuel tank is empty.Fuel not reaching the engine.Fill the tank with fuel and repeat

28SymptomCauseCorrective actionSymptomCauseCorrective actionUnstable idleUnsuitable glowplugUse suggested glowplug in the instructions.Unsuitable fuel

30MAX-12TZ (P)-T3 ENGINE EXPLODED VIEWType of screw C...Cap Screw M...Oval Fillister-Head ScrewF...Flat Head Screw N...Round Head Screw S...Set Scr

3211H CARBURETOR EXPLODED VIEWType of screw C...Cap Screw M...Oval Fillister-Head ScrewF...Flat Head Screw N...Round Head Screw S...Set ScrewS.M3x3

34MAX-12TZ (P)-T5 ENGINE EXPLODED VIEWType of screw C...Cap Screw M...Oval Fillister-Head ScrewF...Flat Head Screw N...Round Head Screw S...Set Scr

3611H (B) CARBURETOR EXPLODED VIEWType of screw C...Cap Screw M...Oval Fillister-Head ScrewF...Flat Head Screw N...Round Head Screw S...Set ScrewS.

2!!Remember that your engine is not a "toy", but a highly efficient internal-combustion machine whose power is capable of harming you, o

38RACING ENGINE PARTS(72106420)(72106172)(72106172)(72103051)(72103056)(72103071)(72103076)(72106400)(72106172)(72106410)(72106172)(72106310)(22826140

402.11 cc (0.128 cu.in.)13.8 mm (0.543 in.)14.0 mm (0.551 in.)5,000-40,000 r.p.m.1.5 ps / 33,500 r.p.m.224.5g (7.92 oz.)      JAPANJAPANUNEF1

4!This engine is intended for model cars. Do not attempt to use it for any other purpose.Mount the engine in your model securely, following the manu

6PistonCylinder LinerCrankshaftENGINE CONSTRUCTIONWith this engine, the piston will feel tight at the top of its stroke (TDC) when the engine is cold.

8Standard accessoriesGlow Plug P6 T-type head (Turbo head) 1pieceExhaust Seal Ring 1piece(Hot Type)ABOUT THE ENGINENOTEThese engines are rear exhau

10FUEL PUMPFor filling the fuel tank, a simple, polyethylene "squeeze" bottle, with a suitable spout, is required. SILICONE FUEL LINEHeatpro

12Install the exhaust sealring supplied.Exhaust Seal RingGlowplugINSTALLATION OF THESTANDARD ACCESSORIESInstalling the glow plug. Insert P6 plug suppl

14Since the compatibility of the glowplug and fuel may have a marked effect on performance and reliability, it is suggested to use the O.S. P6 plug wh

16STARTING THE ENGINE & RUNNING-IN ('Breaking-in)PRESSURIZED FUEL SYSTEM!Before starting the engine, always check the tightness of all the