Os-engines 32SX Bedienungsanleitung

It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages

Retaining Screw Size15CV-A25FX32SX3.0mm3.0mm3.0mmINSTALLATION OF THE ENGINERigid hardwood(e.g. maple)At least12mm(1/2")At least12mm(1/2")O.S

Before connecting the throttle-lever / servo linkage, make sure that no part of the linkage interferes with the internal structure of the aircraft or

Model engines generate considerable heat. Do not touch any part of your engine until it has cooled.Contact with the muffler (silencer), cylinder head

The role of the glowplugWith a glowplug engine, ignition is initiated by the application of a 1.5-volt power source. When the battery is disconnected,

FUELPROPELLERSSuggested propeller sizes are listed on page 14. The suitability of the prop depends on the size and weight of the model and type of fly

MIXTURE CONTROLS15CV-A25FX32SX8✕4~6,8✕4~6,9✕49✕5~6,9.5✕5,10✕510✕6,10.5✕5,11✕6Sport8✕4~69✕6,9.5✕59✕7~8,10✕6AerobaticNever touch, or allow any object to

Battery leads12V BatteryStarter5 Battery leadsThese are used to conduct current from the battery to the glowplug. Basically, two leads, with clips,

STARTINGFill the fuel tank. Do not allow fuel to overflow into the silencer, otherwise the engine may become flooded and difficult to start.Check that

6. Connect battery leads to glowplug.Bring electric starter into contact with spinner-nut or spinner and depress starter switch for one or two second

Now close the needle-valve until the engine speeds up to "two-cycle"operation and allow it to run for about 10 seconds, then reopen the need

CONTENTSSAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINEINTRODUCTION,BEFORE INSTALLING THE ENGINEBASIC ENGINE PARTS CARBURETOR PARTSINSTALLATIO

20~45˚Needle-valve adjustment diagramThis diagram is for reference purposes only. Actual needle positions may differ from those shown.To stop the eng

IDLING ADJUSTMENT CHARTStart the engine.Make sure that the throttle isfully open.Adjust the neede-valve.Close the throttle gradually.Find the idling p

MIXTURE CONTROL VALVE ADJUSTMENTREALIGNMENT OF MIXTURE CONTROL VALVEWith the engine running, close the throttle and allow it to idle for about five se

SUBSEQUENT STARTING PROCEDURESUBSEQUENT READJUSTMENTOnce the optimum needle-valve setting has been es-tablished (see page 19, Needle-valve adjustment

CARBURETOR CLEANLINESSENGINE CARE AND MAINTENANCEAt the end of each operating session, drain out any fuel that may remain in the fuel tank.Next, energ

No.8(71608001)A5(71605100) For 25FX.32SX 73101000 1/4"-2825FX. 32SX211255022262550815CV-A(871)25FX(892) 32SX(E-3030)2112510822625103233251001

(72403050) (71531000)(71521000) 55500002 25FX.32SXM3 23325030 E-3030S 32SXCode No.SizeType of EngineSUPER SILENCERSSizeCode No.Type of EngineSUPER F

EXPLODED VIEW (15CV-A) Type of screwC…Cap Screw F…Flat Head Screw N…Round Head Screw S…Set Screw 1234567890-=qwerC.M2.6x12M.M2.6x8e-1e-2e-3e-

Specifications are subject to alteration for improvement without notice.ENGINEN PARTS LIST (15CV-A)No.1234567890-=qwee-1e-2e-3e-4e-5rDescription Reta

EXPLODED VIEW (25FX,32SX)✽ Type of screwC…Cap Screw F…Flat Head Screw N…Round Head Screw S…Set Screw re-7e-6e-5e-4e-3e-2e-1ewq=-098765-25-154321

Remember that your engine is not a "toy", but a highly efficient internal-combustion machine whose power is capable of harming you, or other

Code No.No.25FX32SX123455-15-267890-=qwee-1e-2e-3e-4e-5e-6e-7r2260402022603040226060092280501022681030226150002308170623210007230090062280800022620003

987654321-11N.+M3.5X51235 4678123456782 2681 4302 1284 2002 1284 6002 2481 5062 1581 1002 2681 3202 2681 9532 2615 00011-123456789Throttle Lever Assem

9876543211-21-15-1N.+M3.5X5CARBURETOR 20F (32SX)11-11-223455-16789Throttle Lever Assembly Throttle Lever Fixing Screw Throttle LeverThrottle Rot

MAX-25FXMAX-32SX4-ø3.315383516191/4-28UNF245322.624.822.330.5304615.56030.645UNF1/4-28225322.724.82230.515.357.23516 193815 4-ø3.3THREE VIEW DRAWING D

C Copyright 2000 by O.S.Engines Mfg. Co., Ltd. All rights reserved. Printed in Japan.UNEQUALLEDQUALITYPRECISION&PERFORMANCEESTABLISHINGTHESTANDAR

WARNINGSModel engine fuel is poisonous. Do not allow it to come into contact with the eyes or mouth. Always store it in a clearly marked container and

NOTES•••••This engine was designed for model aircraft. Do not attempt to use it for any other purpose.Mount the engine in your model securely, followi

NOTES••Always check the tightness of the propeller nut and retighten it, if necessary, before restarting the engine, particularly in the case of four-

NOTES•••••Adjust the throttle linkage so that the engine stops when the throttle stick and trim lever on the transmitter are fully retarded. Alternati

This range of engines is ideally suited to a variety of R/C aircraft, including trainer, sports, aerobatic and scale types.A separate precision-made n

BASIC ENGINE PARTSCylinder headCarburetor Silicone TubeCrankshaftPropeller nutPropeller washerDrive HubCrankcaseNeedle valveCover PlateFuel outletFuel